Skip to content
QuirkyBit StudiosTools for web novel authors

User guide

Webnovel Mass Scheduler User Guide

Install the Chrome extension, set up your schedule and mass schedule chapters, step by step with screenshots and videos.

  • Chrome extension
  • Step by step
  1. InstallAdd the extension from the Chrome Web Store.
  2. Sign inEnter your email and the code we send you.
  3. Build your scheduleChoose the first date and the chapters for each weekday.
  4. ScheduleCheck the dates, then schedule every chapter in one run.

Watch first

Video guide

Get started · Step 1 of 21

Install from the Chrome Web Store

Use Chrome on a desktop computer. You also need to be logged in to Webnovel’s Inkstone with permission to edit the novel you want to schedule.

  1. Open the official Webnovel Mass Scheduler listing in the Chrome Web Store.
  2. Select Add to Chrome, review Chrome's permission prompt, and choose Add extension. Wait for Chrome to confirm the installation.
  3. Open Chrome's Extensions menu and pin Webnovel Mass Scheduler. Click the extension icon, then choose Open in tab at the top for more room.

Open in the Chrome Web Store

Webnovel Mass Scheduler opened in a browser tab, showing the Release schedule section
Open in tab gives the settings a full browser tab.

The extension is distributed only through the Chrome Web Store. Keep an exported backup of your project settings and your original chapter files.

Get started · Step 2 of 21

Your privacy: what stays on your computer

  1. Everything runs inside Chrome on your computer. The extension works right on the Inkstone page you already use, just as you would by hand.
  2. No login needed: there is nothing to connect, and you never give us your WebNovel login or password.
  3. Your chapters and project settings are saved in Chrome on this computer. When you start a run, each chapter goes straight from your browser to Inkstone. It never passes through our servers.
  4. No diagnostics, no crash reports, no analytics and no trackers: the extension does not collect them.
  5. Polar handles payments, so we never see your card.
  6. Export a backup from the extension if you change computers or browsers, because your chapters are not stored online.

Removing the extension or clearing its data deletes the chapters saved in Chrome. Chapters already scheduled stay scheduled on Inkstone.

Get started · Step 3 of 21

Enable the scheduler and choose its appearance

  1. Open the settings icon at the top right of the extension.
  2. Turn on Extension. This makes the scheduler available on Inkstone pages; it does not start publishing.
  3. Use Dark mode or Light mode to change the appearance. Privacy policy opens the policy in a new tab.
  4. Open your novel's chapter-list page in Inkstone and keep it open. The extension's status then reads Inkstone novel open.
Extension settings menu with the Extension switch, Dark mode and Privacy policy
The Extension switch controls whether the scheduler appears on Inkstone.
Get started · Step 4 of 21

Sign in to your scheduler account

  1. In Account and access, enter your email and choose Send code. Enter the six-digit code from your inbox and choose Verify and sign in. There is no password.
  2. The code works for 10 minutes; the panel counts down how long it has left. If it does not arrive, check your spam folder, then choose Resend code once its countdown (about a minute) ends.
  3. Check the email shown in Account and access. Use the same email on this website so the extension and the website show the same plan.
  4. Choose Start trial or subscription. The website account page opens already signed in. Start the free trial there: it needs no card and lets you schedule up to 20 chapters per run, 60 chapters in total (for example 3 runs of 20). Subscribe to schedule up to 500 chapters per run.
  5. Back in the extension, choose Refresh account. Account and access shows your plan and how many chapters your next run can schedule.
  6. Your Inkstone login is separate: log in to Inkstone in the same browser as well. The email code signs you into your scheduler account, not into Inkstone.
Account and access before sign-in, with the email field and the Send code button
Sign in with your email and a one-time code.
Account and access during a free trial, with the chapters per run and the trial chapters left
Account and access shows your subscription and how many chapters your next run can schedule: up to 20 per run during the free trial (60 in total), up to 500 per run with a subscription.

Scheduling needs an active free trial or subscription. During the trial, Account and access shows how many trial chapters you have left.

Set up a novel · Step 5 of 21

Create a project for your novel

  1. In the Project section, choose New project to create a separate project for a novel.
  2. Enter a Project name you will recognise. Use Current project to switch between novels.
  3. Set up that project's novel, schedule and chapters using the steps below.
  4. Choose Save project settings at the bottom after editing. Switch projects only after saving the changes you want to keep.
Project section with the current project The Paper Kingdom, its name, New project, and the restore and delete actions
Each novel has its own project, schedule and chapters.

The pictures use a made-up novel and example IDs. Enter your own novel link and chapter text.

Set up a novel · Step 6 of 21

Connect the correct Inkstone novel

  1. Open your own novel's chapter list in Inkstone and copy its address from the browser.
  2. Paste it into Novel link in the Inkstone novel section. A typical address is https://inkstone.webnovel.com/novels/chapter/list/YOUR_BOOK_ID.
  3. Check that the Book ID shown under the link matches the novel. The extension reads this ID from the link.
  4. Use Open in Inkstone to go to that novel. Check the current project and its Book ID before scheduling.
Novel link
The chapter-list, chapter-create or novel-view link of your novel on Inkstone.
Book ID
The number of your novel. It is filled in from the link. Do not use a chapter ID or an ID from another book.
Author's thought
Your author note, shown under each chapter on WebNovel. Replace the default note, or leave it empty if you do not want one.
Inkstone novel section showing the Novel link, the Book ID read from it, and Author's thought
The Inkstone novel section holds the novel this project schedules to, and the author note.
Build your schedule · Step 7 of 21

Set the first release date and weekly schedule

  1. Under Release schedule, set First release date to the first day a chapter should go live. Use a future date for a new schedule.
  2. Set Start from chapter to the number of the chapter the schedule starts from, not how many chapters to send.
  3. Set Release time, in the time zone chosen under Times are in (next section). First releases lists the first chapters exactly as they will be scheduled.
  4. Under Chapters per weekday, enter a count for each day. 0 skips that day. At least one weekday needs a count above 0 when Launch burst is off.
  5. For example, Mon 2, Tue 1, Wed 2, Thu 1, Fri 2, Sat 0, Sun 0 schedules eight chapters a week, with nothing on the weekend.
First release date, Start from chapter and Release time fields
The date and Start from chapter set the beginning of your schedule.
Chapters per weekday, Monday to Sunday, with zero on the weekend and eight per week
Each weekday has its own count. Zero means no chapters on that day.

Several chapters on one day go out five minutes apart, starting at Release time. Chapters always publish in order and never share a minute: if a long day runs past midnight into the next day's time, the later chapter moves to the next free minute. Check the preview for the exact chapter, date and time of each release.

Build your schedule · Step 8 of 21

Choose My time zone or Inkstone time (GMT+8)

  1. Under Times are in, choose My time zone to type times in the time zone of this computer. The line below names the time zone the extension found.
  2. Choose Inkstone time (GMT+8) to enter Webnovel's own time directly, without conversion.
  3. Recheck dates and times after switching. The same 18:00 is a different moment in the two modes.
  4. In the pictures, Europe/London is UTC+1 during British Summer Time, so 18:00 there is 01:00 the next day in GMT+8. Each chapter is converted with the offset of its own release date, so a daylight-saving change between now and then is accounted for.
  5. On a daylight-saving night, a local time can be skipped (clocks go forward) or happen twice (clocks go back). Such a release is shown in red in Schedule preview, and scheduling stays unavailable until you pick another time or use Inkstone time (GMT+8), which has no daylight saving.
Times are in: My time zone selected, with the time zone Europe/London shown underneath
My time zone converts the times you enter to Inkstone's GMT+8 time.
Times are in: Inkstone time (GMT+8) selected, with no conversion
Inkstone time (GMT+8) uses the date and time exactly as you enter them.

In My time zone mode, the preview and the results show your time first and the Inkstone time (GMT+8) below it.

Build your schedule · Step 9 of 21

Use a launch burst for an opening release

  1. Turn on Launch burst when the beginning of the schedule needs more chapters than the weekly schedule gives.
  2. Set Burst days: how many opening days use burst rules (up to 31).
  3. For Day 1, set Chapters, From and To. Chapters are spread evenly from the From time to the To time, both included. A To time earlier than From runs past midnight; the same time for both spreads the chapters over 24 hours.
  4. With two or more burst days, each later day (Day 2, Day 3 and so on) has its own Chapters, From and To. A new day starts with the values of the day before it, so change only what differs. Set a day to 0 for no chapters that day.
  5. After the last burst day, the weekly schedule continues at Release time; the line under the day cards names the day. Review the burst rows in Schedule preview before starting.
Burst days
How many opening days use burst rules. Day 1 is the first release date; each burst day is the next calendar day.
Chapters (per burst day)
How many chapters that day releases. 0 means none that day.
From / To (per burst day)
The release window, in the selected time zone. An overnight window carries into the next date. Chapters always publish in order and never share a minute: if a window is too short or runs into the next day's chapters, later chapters move to the next free minute.
Launch burst with two days: Day 1 three chapters from 09:00 to 18:00, Day 2 two chapters from 10:00 to 16:00, each with its Inkstone times
Each burst day lists the times its chapters go out. In My time zone mode the second line gives the same times on Inkstone (GMT+8), where 18:00 in London is 01:00 the next day.

Burst changes when chapters are released, not how many a run schedules. A run can schedule up to 500 chapters with a subscription, or up to 20 during the free trial; check the preview before starting.

Prepare chapters · Step 10 of 21

Import chapters by pasting text

  1. Scroll to Chapters and choose Paste text.
  2. Paste complete chapters, each starting with a numbered heading such as Chapter 1: The Last Letter and Chapter 2: An Unmarked Road. Bold and italics are kept.
  3. Check the line under the box: how many chapters were found, their range, and any missing numbers.
  4. Choose Import pasted chapters. If the project already has saved chapters, the extension asks first, because an import replaces them all. Confirm, then check the Saved count.
Chapter 1: The Last Letter

Your first chapter text goes here.

Chapter 2: An Unmarked Road

Your second chapter text goes here.
Paste chapters window with two numbered chapters, 2 chapters found, Chapters 1 to 2 and None missing
The paste window reports what it found before anything is saved.

A numbered heading must start on its own line. Each import replaces the chapters saved before, so paste every chapter you want to keep in one go. A chapter number that appears twice in one import is rejected; correct it before importing.

Prepare chapters · Step 11 of 21

Upload files and check your saved chapters

  1. In Chapters, choose Upload files and select one or more .txt, .docx or .html files (.md works too). Bold and italics are kept. Select all your files in one go: each import replaces the chapters saved before.
  2. Start each chapter with a numbered heading inside the file, such as Chapter 12 or Chapter 12: Title. The heading is where the chapter number and title come from.
  3. Review Saved, Range and Missing, and the Last import time.
  4. Open Show saved chapter numbers to see which numbers are present. If one is missing, import the whole set again with that chapter included.
  5. Title in chapter text is off at first: the heading line is used as the chapter title only. Turn it on if the heading should also be the first line of the chapter text.
Chapters section with 12 saved chapters, range 1 to 12, none missing, Upload files and Paste text, the Title in chapter text switch and the saved chapter numbers
The chapters saved in Chrome for the current project.

Clear removes the chapters saved for the current project. It does not remove chapters already sent to Inkstone. Your original chapter files are your backup of the text.

Optional publishing settings · Step 12 of 21

Add book recommendations and author notes

  1. Set Author's thought in the Inkstone novel section for the author note you want sent with chapters.
  2. Turn Book recommendations on if you want recommendations included for this project. Turning it off keeps the saved books but stops sending them.
  3. Choose Add a book. Give each book a title and paste a link to it: its page on webnovel.com (…/book/…) or its Inkstone page. The Book ID is read from the link and shown under it; a link that is not a book page is refused. Cover ID is optional.
  4. With several books, they take turns, one per chapter, and the novel you are scheduling is skipped.
  5. Save the project after changing the book list.
Book recommendations with two books, each with its title, book link and the Book ID read from it
Paste the book's own page link; the Book ID is read from it.

The Book recommendations switch is saved straight away for the current project. Other edits still need Save project settings.

Optional publishing settings · Step 13 of 21

Configure the Patreon progress notice

The extension works out the current chapter number on Patreon for each book from the schedule you enter in Patreon notice. Each book has its own starting chapter, starting date and weekday release counts. The result is added to the end of your Webnovel chapters.

  1. Turn Patreon notice on for the project that should include the message. Enter your introduction in Opening text and your own Patreon link in Closing text. New projects start with patreon.com/YourCreatorName there; scheduling waits until you replace it with your Patreon page name.
  2. Under How often, choose Every chapter, or Every few chapters and set the number. With every 5 chapters, the first chapter of each run gets the notice, then one every 5 chapters after it (for example 41, 46, 51). A retry or a continued run keeps the same chapters, and switching the notice off removes it from every chapter.
  3. Choose Add story once for every book you want listed. Its title is that book's name in the notice; it can be different from the novel you are scheduling.
  4. For each book, enter the latest chapter already available on Patreon in Patreon was at chapter, and the date in On date. Use a date on or before the Webnovel releases you are scheduling. This is the starting point of the calculation, so that date's releases must already be included in the number.
  5. Under New Patreon chapters per weekday, set MON through SUN to the number of new chapters that book releases on Patreon on each weekday. Use 0 for a day with no release. These are that book's Patreon counts, separate from your Webnovel schedule.
  6. Check Preview for today, and the chapter shown on each story. For each book, it adds the releases after its date through today. For a Webnovel chapter scheduled in the future, the notice is worked out for that chapter's release date instead.
  7. Choose Save project settings. The notice is worked out again for every scheduled chapter, so several books with different Patreon schedules can appear together with different chapter numbers.
Story title
The book title readers see in the notice. Add a separate story for every book, novel or fanfic.
Patreon was at chapter + On date
A known Patreon chapter number on a known date. That date itself is not counted twice.
MON / TUE / WED / THU / FRI / SAT / SUN
New Patreon chapters per weekday for this book. These numbers drive the calculation.
Example: The Paper Kingdom
Chapter 50 on Monday, September 7, 2026, then 2 chapters every weekday. By Wednesday, September 9: 50 + 2 Tuesday + 2 Wednesday = chapter 54.
Example: Lantern Road
Chapter 120 on the same Monday, then 1 chapter on Monday, Wednesday and Friday only. By Wednesday: 120 + 0 Tuesday + 1 Wednesday = chapter 121.
On a Webnovel chapter scheduled for September 9, 2026:

Read ahead on Patreon:
The Paper Kingdom = CHAPTER 54
Lantern Road = CHAPTER 121
Your Patreon link
Patreon notice with opening and closing text, each story's chapter, date and weekday counts, and Preview for today
Each book's Patreon schedule gives its own chapter number. The preview shows today's numbers; scheduled chapters use their release date.

The numbers are worked out from the schedule you enter: the extension does not read your Patreon posts or publish to Patreon. If you skip, add or delay a release, update that book's starting point or weekday counts before scheduling more chapters. Chapters already on Inkstone are not edited. Turning the notice off keeps its saved values.

Optional publishing settings · Step 14 of 21

Share notices or recommendations across projects

  1. Set up the recommendations or the notice you want to share, then switch on Use for all projects in that section.
  2. Recommendations and the notice each have their own Use for all projects switch.
  3. While it is on, an edit changes the shared values for every project. Each project's own on/off switch still decides whether the shared content is included.
  4. Switch Use for all projects off to return to that project's own values.
Patreon notice with Use for all projects switched on
Use for all projects shares the notice or the book list, not the chapters or the release schedule.
Publish chapters · Step 15 of 21

Save and check the project before publishing

  1. Choose Save project settings at the bottom of the extension.
  2. Check that the project name, Novel link and Book ID are for the intended novel.
  3. Check Start from chapter, the first release date, time zone and weekday counts. Check that the saved chapters include the ones you need.
  4. Review the optional recommendations, author note and notice text. Switch off anything you do not want included.
  5. Open the matching Inkstone chapter-list page and stay logged in there.
Save bar showing unsaved changes, with Discard and Save project settings
Save keeps the edits the scheduler on Inkstone will use.

Restore default settings resets the project's settings. Delete project removes the current project from this browser and is unavailable when only one project remains. Neither undoes chapters already scheduled on Inkstone.

Publish chapters · Step 16 of 21

Open the scheduler and check every release

  1. On the matching Inkstone chapter-list page, choose Open Webnovel Mass Scheduler.
  2. The panel has two tabs, Schedule and Drafts. On Schedule, check the project name at the top and the Book ID. If This novel has no project yet appears, return to the extension, correct the Novel link and save.
  3. Set Chapters to schedule. The number of chapters ready is shown. A subscription schedules up to 500 chapters per run; the free trial schedules up to 20 per run and 60 in total, and the box will not go higher during the trial.
  4. Check Schedule preview: chapter number, date, time and any burst labels. In My time zone mode each row also shows the Inkstone time (GMT+8) that will be sent. Start with one or two chapters for your first test.
  5. Choose Schedule N chapters only after checking the preview. This sends chapters to Inkstone; it is not a dry run.
The scheduler panel on Inkstone with the Schedule and Drafts tabs, Chapters to schedule, Schedule preview and the Schedule 5 chapters button
The scheduler panel on the Inkstone page, shown with a sample project.

Keep this Inkstone tab and Chrome open while chapters are being scheduled. Once they are scheduled, Inkstone releases them on their dates; your computer does not need to stay on.

Publish chapters · Step 17 of 21

Follow progress and stop a run

  1. A chapter that is already scheduled on Inkstone with the same title and release time is counted as Done earlier and is not sent again.
  2. The progress window counts scheduled, failed and skipped chapters, and lists each chapter with its release time: your own time first and the Inkstone time (GMT+8) below it.
  3. Wait for the run to finish before closing the tab. Short pauses between chapters are expected.
  4. Open Details and log when a chapter needs attention.
  5. Use Stop scheduling if you need to stop. Wait for the current chapter to settle and read the results before closing the tab. Chapters already scheduled on Inkstone are not removed when you stop.
Scheduling chapters window with two of five chapters scheduled and the Stop scheduling button
The progress window during a run, shown with sample chapters.
All chapters scheduled: five chapters, each with its release time and the Inkstone time
When the run finishes, every chapter is listed with its release time.
Publish chapters · Step 18 of 21

Recover from a failed, skipped or interrupted run

  1. Read the reason beside each chapter, and Details and log if you need more. A chapter whose text is not imported is skipped; an Inkstone error is failed.
  2. Fix the cause: log in to Inkstone again, restore your connection, or import the missing chapter. Keep the same project and schedule.
  3. Choose Retry (it shows how many chapters it will send). It sends only failed chapters, and skipped chapters whose text you have imported since. Chapters already scheduled are never sent again.
  4. If the tab was closed during a run, open the scheduler again and start with the same settings. Chapters that reached Inkstone are not sent twice; only the rest go out.
  5. A chapter you deleted from Inkstone's Drafts is sent again on the next run, so deleting a draft is how you redo a chapter.
Results with four chapters scheduled, one that did not go through, and the Retry 1 chapter button
Retry sends only the chapters that did not go through.

A skipped chapter that is still missing from your saved chapters cannot be retried. Import it first. If a run says it was not checked for chapters already scheduled, look at Drafts on Inkstone before you run the same chapters again.

Publish chapters · Step 19 of 21

See and delete drafts on Inkstone

The Drafts tab of the scheduler panel lists every draft of the novel on Inkstone, including the chapters you scheduled, and deletes many of them in one go.

  1. Open the scheduler on your novel's Inkstone page and choose the Drafts tab. Each draft shows when it was drafted and its release time, or Not scheduled. Times are in your time zone, as on Inkstone's Drafts page.
  2. Use Search chapter titles to find a draft, and All, Scheduled or Not scheduled to narrow the list. Each filter shows how many drafts it holds. Refresh (the round arrows at the top) reads the list from Inkstone again.
  3. Tick the drafts to delete, or use Select all. With a search or filter on, Select covers only the drafts shown. Clear removes every tick.
  4. Choose Delete N drafts, read the question, and confirm. The drafts move to Trash in Inkstone, one at a time; a scheduled draft that is deleted will not be released.
  5. Stop deleting ends it after the current draft. If a draft cannot be deleted, the scheduler stops there and tells you which one; the rest stay selected.
  6. To delete a single draft, use the bin on its card.
Drafts tab listing nine drafts with their drafted and scheduled times, the search box, and the All, Scheduled and Not scheduled filters
Every draft of the novel, with its release time in your time zone.
Two drafts ticked and the question Delete 2 drafts, with Cancel and Delete 2 drafts
The scheduler asks before it deletes, and says how many of the drafts are scheduled.

Deleting drafts needs an active free trial or subscription, and it does not use up trial chapters. While a run or a delete is going on, the same novel cannot be scheduled or deleted from in another tab.

Maintain your workspace · Step 20 of 21

Back up, restore and manage multiple projects

  1. Open Backup and choose Export….
  2. Tick individual projects, or use All or None, then choose the export button. The download is a settings file.
  3. Keep your original chapter files separately. Chapter text is not included in the export.
  4. To restore, choose Import file and select the exported file. Read any message it shows, select the restored project and check its settings.
  5. Import the original chapter files again as needed, then save and review the schedule before scheduling from the restored project.
Backup section with Export, Import file, and the list of projects to export
Export your settings regularly, and before resetting, deleting a project or changing computers.
Maintain your workspace · Step 21 of 21

Troubleshooting and final checks

"Cannot connect to your account"
Install the extension from the Chrome Web Store link on this website, then sign in again. If it is already installed from there and the message stays, contact support.
No scheduler button on Inkstone
Turn on Extension in the settings menu, open an Inkstone chapter-list page, and reload the page after installing or updating the extension.
This novel has no project yet
Save a project whose Book ID matches the novel open on Inkstone.
No chapters or missing numbers
Import the chapter text first. Check Range and Missing, then import the whole set again with the missing chapter included.
Unexpected release time
Check My time zone versus Inkstone time (GMT+8), and the time zone named under it. The results show your time and the Inkstone time for every chapter.
Empty schedule preview
Set a valid first release date and Start from chapter. Give at least one weekday a count above 0, or set up a launch burst.
Sign-in expired
Use Account and access to sign in again or choose Refresh account. This does not replace the separate Inkstone login.
This novel is in use in another tab
A scheduling run or a delete of its drafts is going on in another tab. Let it finish, or stop it there, then try again.
Not sure a chapter went through after a timeout
Open the Drafts tab, or Drafts on Inkstone. Then start again with the same settings: chapters already there are not sent twice.
Website and extension show different plans
Check that both use the same email, then choose Refresh account.

For support, include the extension version, your browser version, the affected chapter numbers and the error text. Never share one-time codes or your chapter files.

Extension screenshot